2017 Double Garage Door Cost, Install Double Garage Doors, garage door installation seattle.#Garage #door #installation #seattle


Double Garage Door Price Guide

Get free estimates from local Garage Door contractors.

Double garage doors are made to accommodate a garage that is wide enough to hold two vehicles side by side. Careful selection of the garage door allows homeowners to achieve an aesthetically pleasing look, lower their energy bills and add value to their homes.

The Costs

  • The average minimum cost of a double garage door is $635.
  • The average maximum cost of a double garage door is $1,030.

In addition to the cost of the double garage door, homeowners beginning this type of home improvement project will face some additional costs. If the homeowner needs a door taller than seven feet or wider than 14 feet, this will add to the materials cost. Supplies such as mounting hardware and lubricant for the garage door add an average of $121 to the project. The average hourly cost for installers to put in a double garage door is $34. If the garage door opening requires any structural modifications, the cost of labor will be higher. An automatic garage door opener is not included with the purchase price of the double garage door. Homeowners who want an automatic garage door opener will have to pay for the opener and its installation costs separately from the cost of materials and labor for the door.


Double garage doors can be constructed out of a wide variety of materials. Each of these materials have distinct advantages and features. Different materials are ideal for specific environments. Some materials are more readily available than others, and there are significant price variations in double garage doors, depending on the type of material used to construct the door as well as whether or not the door is insulated. The materials used to construct double garage doors include:

Steel is the most common material used to make double garage doors. Insulated double garage doors made of steel are also available. These consist of two layers of steel with polyurethane or polystyrene foam between the layers. Steel offers strength and durability. Steel garage doors can also be rated for heavy wind and used in hurricane-prone environments.

Aluminum is a lightweight material that resists corrosion. It is ideal for use as a double garage door in areas where strong winds are not a problem. Aluminum is inexpensive but not as strong or durable as steel.

For many years, wood was the only choice for a garage door. Double garage doors made entirely of wood are uncommon due to the weight and ductility of the wood. To build a wooden double garage door, most manufacturers simply create a wood veneer and apply it onto panels of plywood. This reduces the heft but gives the aesthetic appeal that homeowners desire.

Fiberglass is a newer option for double garage doors. It can be insulated and textured to give the appearance of a wood grain. Fiberglass is resistant to corrosion but is easily cracked or punctured.

Double garage doors are available in an endless array of styles. Some double garage doors have windows of clear or opaque glass to add light to the garage. Double garage doors can be created to mimic the look of barn doors and other specialty doors. The most common styles of double garage doors are:

  • Raised Panel Double Garage Doors: The exterior side of the garage door features sculpted rectangular or square panels. When the door is opened, the hinges of the panels allow the door to be raised without swinging outward. These doors are typically made of steel.
  • Carriage House Style: This type of double garage door is designed to mimic the look of historical carriage house doors. These doors may be made of wood or a material textured and stained to look like wood.
  • Flat Vertical or Horizontal Panels: This is a basic garage door design and any material can be used to construct it. The panels can be highlighted with different colors or with windows for added aesthetic appeal.

There are many manufacturers of double garage doors. Some of the most popular options among homeowners seeking double garage doors include Arm-R-Lite Door, Artisan Custom Doorworks, General Doors Corporation, Haas Door, IDEAL Door Residential Garage Doors and Wayne-Dalton Garage Doors.

Advantages Disadvantages of Double Garage Doors

There are many advantages to installing double garage doors in a home with a two-car garage. This type of garage door fills the opening in the garage without the need for any structural accommodations. Double garage doors can accommodate wide vehicles such as full-size vans and pickup trucks more easily than a single-wide garage door can.

Although there are many great reasons to select a double garage door, there are some drawbacks to this option. Double garage doors are twice as heavy as a standard size garage door and therefore require a stronger motor in the automatic garage door opener. These motors cost more to purchase and install. Manual operation of a double garage door is difficult due to the heft of the garage door. On certain styles of homes, a large double garage door may look out of place and make the garage door an unwanted focal point of the structure.

Laguna Niguel Electrician #berks #electrical #and #lighting,berks #electrical,berks,electrician,electrical #contractor,electrical #services,electrical #wiring,home #electrical,electrical #testing,air,conditioning #commercial,air #conditioning #residential,conditioning,installation,air #conditioning #service,air #conditioning,repair,air #conditioning #sales,attic #fan,bathroom #fan #install,ceiling #fan,code #corrections,complete #home #electrical #upgrade,complete #home #safety #checks,dedicated #electrical #lines,exhaust #fan #electrical #services,humidifiers #electrical,services,generators #electrical #services,hanging #wires,dimmer #installation,dock #lighting,electrical #contracting,electrical #service #upgrades,electrical,troubleshooting,electrical #troubleshooting # # #repairs,electronic #air,cleaners,exhaust #fan,generators,heater #and #air #conditioner #repair,inspection,humidifiers,install #ceiling #fans,install #lighting,install #new #outlets,switch,jacks,kitchen #electricity #upgrade,replace #outlets,landscape,lighting,malibu #lighting,outdoor #lights,outdoor #lighting,under,cabinet #lighting,ground #fault #interrupter,track #lighting,motion #sensors,panel #upgrades,home #electrical #inspection,or #jacks,landscape #lighting,outdoor #wiring,recessed #lighting,recessed #lights,replace #breakers,replace #circuit #breakers,replace #gfis,replace #panels #meters,replace #switches,residential #electrical,rewiring,surge #protection,thermostats,tree #lighting,tree #lights,led #lighting,florescent #lighting,aliso #viejo,anaheim,anaheim #hills,brea,buena #park,chino,corona,corona #del #mar,costa,mesa,coto #de #caza,cowan #heights,cypress,dana #point,diamond #bar,dove #canyon,foothill #ranch,fountain #valley,fullerton,garden #grove,huntington #beach,irvine,ladera #ranch,laguna #beach,laguna #hills,laguna #niguel,laguna,woods,la #habra,lake #forest,la #palma,lido #isle,long #beach,los #alamitos,mission #viejo,newport #beach,newport #coast,orange,orange #county,placentia,portola #hills,rancho #santa #margarita,san #clemente,san #juan #capistrano,santa #ana,seal #beach,trabuco #canyon,tustin,villa #park,westminster,yorba #linda,electrical #troubleshooting # # #repairs


Laguna Niguel

Over one-third of Laguna Niguel is designated as open space. This significant amount of open space is one of the key features defining the character and urban form of the City. The City has 2 community parks, 23 neighborhood parks, 3 mini-parks, 1 dog park, 2 county regional parks, 2 small county parks and the new Laguna Niguel Skate Soccer Park.

Laguna Niguel Electrician Berk s Electrical and Lighting

Electrician in Laguna Niguel, California to serve you with personal, friendly, reliable, experienced and lasting service for electrical repairs, installs, and upgrades. Call us at (714) 744-4300 or (949) 857-8385.

Berk s Electrical and Lighting is a full service electrical contracting company that has been providing electrical contracting for exterior, interior and landscape lighting, retrofits, service installations, new construction, renovations. tenant improvements, service upgrades and repair since the early seventies. Working on designs from start to end with his qualified team of project consultants and technicians Berk s Electrical and Lighting provides the necessary confidence any client needs to get their project finished on time, on budget and to code. Anyone knows that professional interruptions can cause inefficiencies that have a sudden impact on project costs, that s why Berk s Electrical and Lighting focuses on getting electricity restored into your system in the fastest and safest manner possible. It goes without saying that this is at the minimum risk to any valuable or data sensitive equipment.

Our professional Laguna Niguel electricians can come to your Laguna Niguel home and diagnose any problem you may be having. Our trucks are fully stocked to ensure that we have the right tools and materials to ensure the best service for your home. We will do all your electrical work personally to guarantee an excellent job for you. All the electrical materials we install for your project will be the finest that are available.

Quality electrical work depends on consistency and uniformity. That is why there is an electrical code, so everyone is clear on the correct and incorrect way to perform an electrical repair or installation! As a professional electrician, you can depend on Berk s Electrical and Lighting for an electrical repair that will last!

Laguna Niguel Residential Electrical Repairs

Our professional Laguna Niguel electricians can come to your Laguna Niguel home and diagnose any problem you may be having. Our trucks are fully stocked to ensure that we have the right tools and materials to ensure the best service for your home. We will do all your electrical work personally to guarantee an excellent job for you. All the electrical materials we install for your project will be the finest that are available.

Laguna Niguel Commercial Electrical Repairs

Any Commercial building or place of business can use a wide range of Laguna Niguel electrical services, whether it is maintenance or installation. Dedicated circuits to avoid overloading of the circuits and circuit breakers. Energy saving lighting both inside the building as well as outside. Proper voltages to the machines and equipment ensures a longer running time with less problems.

Parking garages and outside parking lots should always have sufficient energy saving lighting. One Laguna Niguel commercial electrical service is if the light fixture does not have energy saving lamps and ballasts, electricians can retrofit the light fixtures making them energy efficient which will lower electricity bills and save electricity.

Electrical Services

Fluorescent Ballast, 110V Circuits, 220V Circuits, 480V Circuits, New Circuits Breakers Fuses, Air Conditioning, Pool Motor Problems, Rewiring, Troubleshooting Indoor Outdoor Lighting, Meter Upgrades Panel Change, Repair Audio Visual Arrays, Ground Fault Interrupter, Track Lighting, Motion Sensors, Panel Upgrades, LED Lighting, Fluorescent Lighting, Troubleshooting And Much More!

WHITEvoid interactive art and design #whitevoid, #interaction #design, #design, #berlin, #interactive #art, #art #and #technology, #kinetic #architecture, #media #architecture, #media #facade, #interactive #installation, #generative #art, #interactive, #interaction, #realtime #3d, #exhibition #design, #interior #architecture, #architecture, #graphic #design, #interface #design, #design #awards, #application, #interface #design, #interactive #graphic #design, #web #design, #online #web #portfolio, #3d #websites, #3d, #museum, #trade #fair #stands, #kinetic #lights, #kinetic #art, #light #art, #3d #portfolio, #portfolio #application


WHITEvoid designed the trade fair stand and exterior area for Vodafone’s appearance at CeBIT 2017 in Hanover.

A multiple-stories high and topics diversified architecture integrates the monumental three-dimensional light installation composed of 360 light elements with individually controllable single pixels. The light animations indicated the dynamics of the Vodafone brand and symbolized flashing, luminous and abstract communication network.

Photos by Christopher Bauder / Nils Günther

19 November 2016

WHITEvoid and TETRO+A present the DEEP WEB kinetic audiovisual installation and performance by Christopher BAUDER and Robert HENKE at the Festival of Lights (Fête des Lumières) in Lyon. The high precision motor winch systems with real time feedback and the main control software are provided by Kinetic Lights. High-end laser system manufacturer LaserAnimation Sollinger provided the technical expertise and development for this very specific spatial laser setup.

DEEP WEB is a monumental immersive audiovisual installation created by light artist Christopher Bauder and audiovisual composer Robert Henke. Presented in enormous pitch dark indoor spaces, DEEP WEB plunges the audience into a ballet of iridescent kinetic light and surround sound. The work was presented as a preview at CTM 2016 Festival in collaboration with Kraftwerk Berlin and will be followed by its original presentation at the Festival of Lights Lyon in December 2016 in cooperation with local producer Tetro .

High-end laser system manufacturer LaserAnimation Sollinger provided the technical expertise and development for this very specific spatial laser setup, while the motor winch systems and main control software are developed by WHITEvoid and Kinetic Lights .

All images by Ralph Larmann

ORBITAL – circular flipdot sculpture

With almost 180.000 mechanical platelets (so-called flip dots) which rotate by an electromagnetic pulse, ORBITAL is the largest flip dot installation in the world. The kinetic sculpture was designed and developed by WHITEvoid specifically for the customer center of Volkswagens Autostadt (car city) in Wolfsburg, Germany.

best of projects


Deep Web



LivingSculpture module

LivingSculpture kinetic

Polygon Playground


Crystal Chandelier

The Wave

Flare Facade



audiovisual live show


Home Network Cabling #network #cabling #perth, #home #network #cable #installation, #home #cable #network, #network #installation


Home Network Cabling

Aussie Cabling are network cable specialists and do network cable installations in Perth homes. We design and install customised phone, computer, digital TV, ADSL and NBN cable / wireless networks. From simple room-to-room connections to whole home cabled networks, Aussie Cabling has the experience and expertise to do it all.

New Cable Installations

As a home owner, you have probably heard and thought a lot about the benefits of a cable network installation. Here at Aussie Cabling we pride ourselves on providing those professional phone, TV and computer network installations for Perth home owners. We maintain the highest levels of industry installation best practice (AS/NZS 3080:2013) to ensure that our networks are reliable and perform at the maximum speed possible. At the same time, as a locally owned company, we are able to keep our prices low and work hard to provide low cost and budget conscious cable installations.

Repairs and Fault Finding

With many years of experience in both domestic and commercial network infrastructure installation and maintenance, along with the latest in quality diagnostic equipment, Aussie Cabling is able to have a technician find and repair any network cable related fault.

Cat 5 or Cat 5e Network Cable Installations

The original Cat 5 standard has now been deprecated, leaving only Cat 5e, although the term Cat 5 is still used, meaning that all current references to Cat 5 are in fact referring to Cat 5e. Cat 5e cabling is rated for network speeds up to 100Mb/sec, making it ideal for phone and ADSL cabling requirements. It is now very affordable and should be used in all new telephone and ADSL cable installations as the minimum standard.

Cat 6 or Cat 6a Network Cable Installations

Cat 6 and now Cat 6a offer enhanced performance for data communication, with Cat 6 rated for speeds up to 1Gb/sec and Cat 6a rated up to 10Gb/sec. Whilst Cat 6a is still significantly more expensive, Cat 6 is now very affordable and is the minimum standard used by Aussie Cabling for any internal data or NBN network cabling.

Simple Network Cable Installations

Cabling your home for data network communication can be as simple as a single wall plate with a Cat 6 socket running to another single wall plate with a Cat 6 socket in another location. This style of cabling can be extremely cost effective, whilst giving you the same flexibility and functionality as the most advanced network distribution hub. Our technicians can give you connectivity with blistering speed from one end of your home to the other.


Email Address:
Phone Number:
Leave this field blank: (Helps stop SPAM)

Cost of Car Alarm Installation – Cars and Prices Paid #car #alarm #installation, #car #alarm #installation #cost, #car #alarm #installation #prices, #car #alarm #installation, #car #alarm #installation #costs, #car #alarm #installation #price, #cost #of #car #alarm #installation,how #much #car #alarm #installation #cost, #average #cost #car #alarm #installation


Car Alarm Installation Cost

Many new vehicles come with a basic car alarm built-in, but vehicle owners in high-crime areas may want to upgrade to a more comprehensive security system, while owners of older or entry-level vehicles may want add an alarm system.

  • Expect to pay $30-$300 for a basic car alarm that has a siren attached to the vehicle’s existing wiring system, one or two remote controls and a simple controller/brain; models at the higher end of this price range may have a back-up battery and/or more sensors than the lower-priced alarms, or a few features like a remote start or a starter immobilizer to prevent hot wiring. For example, the Viper 350 Plus 1-Way Security System 3105V [1 ] with a controller, two four-button remotes, a six-tone siren, a starter immobilizer and an operating range of up to 1,500′ costs $240 .
  • Installation of a basic car alarm typically costs another $50-$200 or more, depending on the complexity of the system and the ease of access inside the vehicle’s dash, bringing the total cost to $80-$500. For example, Best Buy charges $150 for the Avital 3100L Security System with Geek Squad Installation [2 ] ; this package includes a 6-tone siren, two 3-button remote controls, keyless entry, a 1,500′ range and a warn-away (initial low-level response) feature.
  • It typically costs $300-$850 or more for an advanced vehicle security system that has a greater number and more varied range of sensors, a sophisticated computer controller, a wider range of effectiveness and options such as a camera or a remote ignition starter, or the capacity to disable the ignition starter or cut off the gas supply if an intruder is detected. For example, the top-of-the-line Viper 5904 Responder HD SuperCode SST 2-Way Vehicle Security and Remote Start System [3 ] with a one-mile range, upgraded user interface, mini-USB charging port and keychain remote costs $800 .
  • Installation of an advanced car security system can cost $100-$450 or more, depending on the complexity, the ease of access for the make and model of vehicle, and labor rates (as a general rule, labor costs more on a luxury, high-end vehicle than on a lower-priced standard sedan). Total costs for having an advanced system professionally installed can be $400-$1,300 or more.

Related articles: Home Security. Home Security Camera. Security Guard. Radar Detector

What should be included:

  • A basic car alarm has one or more sensors attached to a siren. Most modern car alarms have a variety of sensors — open/close switches on the hood/trunk/doors, pressure sensors and motion/tilt detectors — plus a distinctive siren, a radio receiver for remote control, an extra battery so the alarm works even if the car does not, and a small computer control unit that is the system’s “brain.”
  • Installing a car alarm requires basic electronics knowledge, the right tools (good crimpers and strippers, a soldering iron, a drill and bits, a voltmeter, etc.), the ability to correctly take apart and reassemble the vehicle’s dash, the patience to exactly follow detailed instructions while in uncomfortable positions in tight spaces, and the proper wiring schematic for the vehicle. An advanced security system requires intensive wiring and must be properly integrated with the vehicle’s entire electrical system.


  • Do-it-yourself installation to save labor charges is possible, but can be difficult. For determined do-it-yourselfers, Crutchfield has do-it-yourself instructions [4 ] and Motorz TV provides a video overview [5 ] .

Shopping for car alarm installation:

  • If the goal is to deter break-ins, a basic alarm may be enough. If the objective is to protect items inside the vehicle, it could be better to get a more advanced system designed to monitor all possible points of entry, or one that can be expanded to include additional sensors. An eBay guide explains how to choose a car alarm [6 ] .
  • Car alarm systems are sold and installed by retailers like Best Buy [7 ]. Sears [8 ] or Walmart [9 ] ; or sold by online retailers like Amazon [10 ] .
  • The shop should post all its policies (labor rates, guarantees, payment methods, etc.). Ask if they specialize in this particular type of vehicle, and look for certificates of advanced course work or other training. Check for any complaints with the Better Business Bureau [11 ] .

Shop: Somewhere in patchogue NY

I was quoted for this installation. Did not pay it yet. But I feel like its a hell of a lot. I did the math and came up with these prices from caraudiogiants.com
alarm 189.00
field disturbance sensor 34.00
Voice module (warning stand back) 61.00
Total is 284 without install. That mean labor is almost 500 dollars? He said it’ll take 2 hours. I think its a rip off. I’m willing to pay 600 at most for a perfect installation which means no scratches on any of the interior plastic parts, no wires hanging, etc. I already have a factory alarm which has remote start and gps tracking. It just doesnt go off of you break a window. Only if you open a door. I need to be alerted if anyone goes near my car. Just had 2 center caps stolen the other day.

Was this post helpful to you? yes no

Custom Solar Installations, Solar Financing – Arizona, Phoenix, Goodyear, California #solar #installers #california, #arizona #solar, #solar #az. #solar #installer, #solar #installation, #solar #installations, #solar #phoenix, #solar #goodyear, #solar #financing, #indio, #palm #springs, #palm #desert, #cathedral #city, #thousand #palms, #desert #hot #springs, #morongo #valley


One of the prime solar installers in Arizona, Argent Solar has its headquarters in Goodyear

Argent Solar Harnessing the Power of the Sun to Brighten Arizona

Argent Solar is a leading solar installation and solar financing firm headquartered in Goodyear, Arizona, Phoenix. We are committed to provide premium quality solar installation throughout Arizona and California. Over the years, we have increased our service territory. With marked presence in Arizona, Northern California and Southern California, we extend our services to these areas and the places adjoining them. Our solar installation services are unmatched in terms of quality as well as pricing.

We are the one stop solution for all of your requirements related to solar installation. Our seasoned professionals use their skills domain proficiency to make switching to solar an absolutely effortless easy-going experience. You can definitely count on our vast domain expertise and infrastructure capability to go solar in AZ, CA or its nearby areas. Our solar installations enable you to tap the most out of solar energy, thereby resulting in considerable decrease in your electricity bills besides enhancing the value of your property.

Whether you reside in Phoenix, AZ; Morongo Valley, CA; Indio, CA; or in any area close to these places, we are here to enable you attain your dream of going solar in the most uncomplicated manner. Our basic aim is to harness maximum solar energy to brighten the commercial residential buildings across these areas. You can easily count on our solar installation integration services without thinking twice.


Argent Solar did an excellent job from start to finish I JD Chandler, AZ
Pricing was very competitive with great customer service. The team kept me informed of all the approvals prior to installation and post installation.

Home Solar System Testimonial | Jeff K. Phoenix, AZ
“Argent Solar was very fast at installing my solar system in half the time my utility company said it would take. Very clean work site and very profes.

Shower Faucet Installation #shower #floor #installation #concrete


Shower Faucet Installation

Photo 3: Mount the access panel

Glue the access panel’s frame into place and snap on the cover after you’ve installed the new faucet. You can paint the panel to match the wall.

Problem 1: No access panel” data-analytics-link_name=”previous arrow” data-analytics-page_template=”project detail” href=”#myCarousel20″ data-slide=”prev” data-adobe-metrics=’<"module":"project photos","name":"Previous","position":"step by step">‘> Problem 1: No access panel” data-analytics-link_name=”next arrow” data-analytics-page_template=”project detail” href=”#myCarousel20″ data-slide=”next” data-adobe-metrics=’<"module":"project photos","name":"Next","position":"step by step">‘>

To replace the faucet, you have to work inside the wall. Some homes have a removable panel in the next room behind the faucet. If you don’t have an access panel, you might be able to replace the faucet by cutting a hole in the shower surround (Problem 3 below), but the best solution is to install a paintable plastic panel behind the faucet. You’ll find them in various sizes at plumbing suppliers, some home centers or online (search for “access panel”). Buy a panel that’s at least 14 x 14 in. If you don’t want to install a panel because it would be an eyesore, an oversized cover plate inside the shower surround is another option (Problem 3 below). If you already have an access panel but it’s too low to provide easy access to the faucet, you can install a second panel above the existing one.

Don’t try to position the access hole by taking measurements. Instead, remove the tub spout or faucet handles and punch a marker hole through the wall (Photo 1). If the wall is plaster rather than drywall, use a drill and a long bit instead of a screwdriver. Before you cut a hole sized for the access panel, cut a smaller hole (Photo 2). That way, you can see exactly where the pipes and valves are located and position the full-size hole for best access to them. Use the access panel frame as a template to mark the full-size hole. To avoid damaging the frame of the panel, install it after you’ve replaced the faucet
(Photo 3).

For tips on working with different types of pipe, see How to Join Dissimilar Pipes .

Problem 2: Galvanized steel pipe

Photo 3: Mount the cover plate

Mount the oversized cover plate. Install the faucet’s standard cover plate over it.

Problem 3: Replacing two handles with one” data-analytics-link_name=”previous arrow” data-analytics-page_template=”project detail” href=”#myCarousel40″ data-slide=”prev” data-adobe-metrics=’<"module":"project photos","name":"Previous","position":"step by step">‘> Problem 3: Replacing two handles with one” data-analytics-link_name=”next arrow” data-analytics-page_template=”project detail” href=”#myCarousel40″ data-slide=”next” data-adobe-metrics=’<"module":"project photos","name":"Next","position":"step by step">‘>

If you have a two-handle faucet, it’s easiest to replace it with another two-handle model. If you want the convenience of a single handle, you’ll have to hide the two holes left by the handles. An oversized cover plate does just that. Plus, it covers an access hole, possibly allowing you to skip adding an access panel. Keep in mind that replacing a faucet using this smaller hole can be difficult if not impossible—a large access panel makes the job much easier. You’ll find oversized cover plates (about $23) at plumbing supply stores or online (search for “renovation cover plate”).

To install a single-handle faucet, you’ll have to cut a hole into your shower surround. If your surround is fiberglass or acrylic, cut the hole using a jigsaw and a fine-tooth blade (a coarse blade causes more vibration, which can crack the surround). Apply strips of masking tape to the surround to avoid scratching or chipping the surface. Run the saw at full speed, but push it slowly and gently along the cut mark. If you feel the blade hitting a pipe inside the wall, stop immediately and continue past the pipe using a hacksaw blade.

To cut tile, use a rotary tool equipped with a tile-cutting bit (Photo 1). Set the cutting depth of the bit at 1/4 in. and make the first pass. Make more passes, setting the bit 1/4 in. deeper each time until you’ve cut completely through the surround. If you don’t own a rotary tool, you have a few other options: You can try a jigsaw and ceramic tile blade (about $5). These blades cut softer tile well. If you find that your tile is too hard, drill a series of 1/4-in. holes through the tile and wall using a carbide ceramic tile bit (about $5). Drill the holes close together so there’s little or no space between them. Then cut any material between the holes with the ceramic tile jigsaw bit.

Required Tools for this Project

Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.

  • Tape measure
  • Long screwdriver
  • 4-in-1 screwdriver
  • Adjustable wrench
  • Corded drill
  • Jigsaw
  • Drywall saw
  • Pipe wrench
  • Pliers
  • Reciprocating saw
  • Safety glasses
  • Soldering torch
  • Tube cutter

You’ll also need soldering supplies (solder, flux and emery cloth) and a rotary tool tile-cutting bit, a ceramic tile jigsaw blade and/or a ceramic tile drill bit.

Required Materials for this Project

Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.

  • New valve
  • Shutoff valves
  • Plastic access panel
  • Copper fittings
  • Pipe joint tape
  • Renovation cover plate

Similar Projects

  • Popular How-To Videos

  • Waldorf Plumber #waldorf #plumbing, #heating #md, #boiler #replacement, #hvac #maintenance, #heat #pumps, #plumbing #fixtures, #gas #furnaces, #commercial #plumbing, #water #heater #replacement, #video #inspections, #tankless #water #heater, #ac #installation, #drain #cleaning, #water #conditioning, #ada #fixtures, #sewer #repairs, #boiler #repairs, #bathroom #remodeling, #water #heater #repairs, #air #conditioning #repairs, #plumbing #repairs, #senior #fixtures, #backflow #prevention


    Waldorf Plumber

    Real Plumbers provides Waldorf homeowners with services from plumbing repairs to HVAC maintenance solutions. Waldorf homeowners who are having HVAC or plumbing problems are serviced by our skilled and experienced Waldorf plumbers and heating contractors that will provide service according to the industry’s highest quality standards.

    Real Plumbers – Waldorf HVAC Series

    Our mission as local plumbers in Waldorf is to provide 100% customer satisfaction. Our Waldorf plumbers specialize in prompt, professional service for leaking pipes and blown water heaters to air conditioner replacement and furnace repairs. We operate the best stocked trucks in Waldorf, an efficiency that saves the customer time and money!

    Waldorf Water Heaters

    We know hot water heaters – all makes and models for your Waldorf home. You rely on your hot water heater for comfort. Rely on Real Plumbers team of experienced plumbing contractors for honest advice and same day service on your Waldorf water heater. A broken water heater makes life uncomfortable. It can be confusing to choose between repair or replacement; electric, gas or tankless models; and water heater capacity. We’ll explain all your options.

    • hot water heaters
    • tankless water heater cost
    • on demand water heater
    • tankless gas water heater
    • water heaters
    • hot water heaters prices
    • gas hot water heaters
    • instant hot water heaters
    • water heater prices
    • water heater
    • water heater replacement
    • electric tankless water heaters

    Waldorf Plumbing Repairs

    You wake up in the middle of the night annoyed by a dripping sound that you just cannot ignore no matter how much concentration and diversion one would ordinarily do to take away that from thought; or imagine a situation where you find out that the water in the toilet just does not stop going down right after you flush, these situations are real nightmares that one would not want to be in. These are grim instances when one ought to face Waldorf plumbing repairs.

    The drain pipes and water system of the house is essential to ensure that there is no water wastage. A water leak on any part of the house can pose a long-term danger since this can cause unnecessary flooding or corrosion on metal pipes, cause fixtures to wear out hastily or weaken the structure of the house in general. Plumbing repairs in Waldorf often involve drain pipes and water system that criss-cross inside the house. One ought to identify which drain pipe is connected to such as kitchen sinks, bathroom sinks, toilet bowls, bath tubs or other fixtures. This is very essential as a mistake in identifying the right drain pipe to be fixed or repaired might worsen the problem.

    Plumbing repairs in Waldorf can be done by anyone provided that he would gather a whole lot of information on how to address the problem; it is also important that one be familiar with the materials and concepts used. This solution is viable especially if the person is very much acquainted with plumbing repairs or an expert in the field. Should this be the case, one can guarantee savings on time and money. However, if unsuccessful, the problem can only worsen or may lead one to being certain if the leak will not happen again.

    Services We Provide in Waldorf

    • ac installation
    • air conditioning repairs
    • hvac maintenance
    • tankless water heater
    • commercial plumbing
    • drain cleaning
    • plumbing repairs
    • water heater replacement
    • backflow prevention
    • plumbing fixtures
    • bathroom remodeling
    • sewer repairs
    • water conditioning
    • gas furnaces
    • video inspections
    • boiler repairs
    • ada fixtures
    • heat pumps
    • boiler replacement
    • water heater repairs
    • senior fixtures

    If you’re looking for a professional plumber in Waldorf, then please call 301-567-2001 or complete our online request form .

    Remote Car Starter Installation #auto #parts #discount

    #auto starter

    Remote Starter Installation

    Sun or snow, hot or cold, a remote starter from Ziebart lets you conveniently enter into a comfortable climate in your vehicle.

    A cold vehicle can be an awful way to start your day. Warming your car or truck before your drive can also be a challenge, requiring you to get up early, trudge out to your car. A remote starter installation can change all that, allowing you to get your vehicle warmed up and ready to drive, no matter the weather conditions, from the comfort of indoors.

    Remote Starter Options

    Options that can be included in your remote starter installation are:

    • Additional remote transmitters
    • Door lock and unlock – even one-button remotes can be programmed to lock and unlock your vehicle
    • Trunk release a simple convenience when your hands are full
    • Panic button – draw attention to your car should you feel the need
    • Valet mode – allow your mechanic to work on the vehicle safely
    • Car locator prompts your horn and flashes the lights
    • Extended range enjoy a greater remote starting distance

    Additional options include two-way paging, allowing you to communicate with your vehicle via your remote and find out about items like interior temperature, battery strength, functions such as open/close doors, hoods, locks and more. For those looking to increase range, Ziebart has remote car starter options that can reach upwards of 3,000 feet, allowing you to get your vehicle warm from inside the mall, at work, at the store and more.

    To find out the unique options you can get included in your remote starter installation, visit your local Ziebart and speak with one of our experts.

    Top San Diego – s Car Audio – Video Shop Since 1992 #soundiego, #car #audio #and #video, #car #alarm #installation, #car #stereo #installation, #car #stereo, #car #alarm #and #security, #car #video #installation, #marine #stereo #san #diego, #specialty #vehicle #audio #san #diego, #car #stereo #financing, #custom #stereo #installation, #custom #video #installation #san #diego, #car #window #tinting #san #diego, #led #lighting #san #diego


    Founded in 1992, Soundiego has been proudly serving discerning automotive customers in San Diego for well over 20 years. Our team of experts has honed their skills in the custom installation of car audio and video equipment, window tinting, auto security systems, LED lighting, and other accessories to make your car or motorcycle a one-of-a-kind vehicle you are proud to drive around town in.


    Best Prices

    Personal Touch

    Outstanding Service


    Kim and the team always cone through on my cars with the best installation and best products. My car is knockin.

    I ve been a customer for 15 years with many different cars and the service has always been stellar! Kim always makes sure the customer leaves happy and this is why I ve recommended all my friends have their work done here. I have two older brothers with several thunderous systems put in at Soundiego ever since the early 90 s and we ll keep coming back until we re deaf!

    One happy customer. Talked to Kim on the phone and was told to bring my car in. Took about 3 hours to get my rear and front camera installed for my GTR. Great service and was done properly.

    Kim is professional and friendly. He will not treat you unfairly. Highly recommended

    Always great service. Owner is so friendly, helpful and welcoming. Been coming here for years. Audio sounds amazing

    Great service! I had a Alpine unit and a backup camera installed. My car needed to be rewired because it had fiber-optic cables. I had another place say it would cost over $1000 just in labor, and and take all day. Kim and his crew did it in 5 hours and it cost $365. Note that I had already bought all the parts myself. After I left I sent Kim a message and asked if I could have some of my steering wheel buttons changed. He told me to come back and they would do it at no extra charge! I highly recommend Soundiego!

    Poway, San Diego, CA